Judul: Berbagi Info Seputar How to Root T-Mobile Galaxy Note 5 on Android 6.0 Marshmallow N920TUVU2DOK5 Firmware. Full Update Terbaru
link: How to Root T-Mobile Galaxy Note 5 on Android 6.0 Marshmallow N920TUVU2DOK5 Firmware.
Artikel Terbaru How to Root T-Mobile Galaxy Note 5 on Android 6.0 Marshmallow N920TUVU2DOK5 Firmware. Update Terlengkap 2017
Good News for T-Mobile Galaxy Note 5 owners now you can Root your note 5 on Android 6.0 Marshmallow N920TUVU2DOK5 Firmware.
Follow our guide below to download the Root files and install it yourself.
View my Flipboard Magazine.
÷ Important:
This only for T-Mobile Galaxy Note 5, model no. SM-N920T Don’t try on any other device whatsoever.
*Disclaimer:
Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.
* Important:
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.
÷ How to Root T-Mobile Galaxy Note 5 on Android 6.0 Marshmallow N920TUVU2DOK5 Firmware.
Step 1. Download custom kernel, TWRP recovery, Odin software and SuperSU file .
Step 2. Install Galaxy Note 5 driver first of all. Double click the .exe file of drivers to begin installation. (Not required if you have already done this.)
Step 3. Extract the Odin file. You should get this file, Odin3 v3.10.6.exe (other files could be hidden, hence not visible).
Step 4. Connect the device to PC, and transfer the SuperSU file to it. Then disconnect the device from PC.
Step 5. Boot Galaxy Note 5 into download mode:
Power off your Galaxy Note 5. Wait 6-7 seconds after screen goes off.Press and hold the three buttons Power + Home + Volume down together until you see warning screen.Press Volume Up to continue to download mode.
Step 6. Double click on extracted file of Odin, Odin3 v3.10.6.exe, to open the Odin window, as shown below. Be careful with Odin, and do just as said to prevent problems.
Step 7. Connect your Galaxy Note 5 to PC now using USB cable. Odin should recognize your Galaxy Note 5. It’s a must. When it recognizes, you will see Added!! message appearing in the Log box in bottom left, and the first box under ID:COM will also show a no. and turn its background blue.
You cannot proceed until Odin recognizes your device and you get the Added!! message.If it doesn’t, you need to install/re-install drivers again, and use the original cable that came with device. Mostly, drivers are the problem.You can try different USB ports on your PC too, btw.
Step 8. Load the TWRP file into Odin. For this, click the AP button on Odin and the select the custom kernel file.
Step 9. Make sure Re-partition and Auto Rebootcheckbox are NOT selected under the Options tab. Don’t use PIT tab either. Go back to Log tab btw, it will show the progress when you hit start button in next step.
•When we will flash TWRP recovery in step 11 below, we will keep Auto Reboot checked.
Step 10. Click the Start button on Odin now to start flashing the custom kernel on your Galaxy Note 5. You’ll get PASS message as show below upon successful installation from Odin.
If Odin gets stuck at setup connection, then you need to do this all again. Disconnect your device, close Odin, boot device into download mode again, open Odin, and then select the TWRP and flash it again as said above.If you get FAIL in the top left box, then also you need to flash the firmware again as stated just above.
Step 11. Wait till installation is finished, and when it’s done, it’s time to install the TWRP recoverynow. The procedure is same as above, and is mentioned .
Your Note 5 will stay in download mode.
Now,close Odin. Disconnect the device from PC.Open Odin again.
Connect the device to PC again.
Now, load the TWRP recovery file into AP slot of Odin, like you did for custom kernel.→
Make sure only Re-Partitionoption is unchecked under Options tab.
Keep Auto Reboot checked this time.
Hit Start button to install the TWRP recovery.After installation, device will restart.
Step 12. Once your Note 5 is powered on. We can proceed to install root. For that, make sure that you have SuperSU file in your device. Now, reboot into recovery mode.
Power off your Galaxy Note 5. Wait 6-7 seconds after screen goes off.Press and hold the three buttons Volume up + Home + Power together until you see T-Mobile logo on the screen.
Step 13. You’ll see TWRP recovery. To install root, tap on Install menu, and then select the SuperSU file (which you transferred in step 4 above). Then, do the swipe action at the bottom to confirm installation of root.
Step 14. When done, tap on Reboot System button to restart the device.
That’s it. When your Note 5 starts, it will be rooted on Android 6.0 Marshmallow update.
÷ Important:
This only for T-Mobile Galaxy Note 5, model no. SM-N920T Don’t try on any other device whatsoever.
*Disclaimer:
Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.
* Important:
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.
÷ How to Root T-Mobile Galaxy Note 5 on Android 6.0 Marshmallow N920TUVU2DOK5 Firmware.
Step 1. Download custom kernel, TWRP recovery, Odin software and SuperSU file .
Step 2. Install Galaxy Note 5 driver first of all. Double click the .exe file of drivers to begin installation. (Not required if you have already done this.)
Step 3. Extract the Odin file. You should get this file, Odin3 v3.10.6.exe (other files could be hidden, hence not visible).
Step 4. Connect the device to PC, and transfer the SuperSU file to it. Then disconnect the device from PC.
Step 5. Boot Galaxy Note 5 into download mode:
Power off your Galaxy Note 5. Wait 6-7 seconds after screen goes off.Press and hold the three buttons Power + Home + Volume down together until you see warning screen.Press Volume Up to continue to download mode.
Step 6. Double click on extracted file of Odin, Odin3 v3.10.6.exe, to open the Odin window, as shown below. Be careful with Odin, and do just as said to prevent problems.
Step 7. Connect your Galaxy Note 5 to PC now using USB cable. Odin should recognize your Galaxy Note 5. It’s a must. When it recognizes, you will see Added!! message appearing in the Log box in bottom left, and the first box under ID:COM will also show a no. and turn its background blue.
You cannot proceed until Odin recognizes your device and you get the Added!! message.If it doesn’t, you need to install/re-install drivers again, and use the original cable that came with device. Mostly, drivers are the problem.You can try different USB ports on your PC too, btw.
Step 8. Load the TWRP file into Odin. For this, click the AP button on Odin and the select the custom kernel file.
Step 9. Make sure Re-partition and Auto Rebootcheckbox are NOT selected under the Options tab. Don’t use PIT tab either. Go back to Log tab btw, it will show the progress when you hit start button in next step.
•When we will flash TWRP recovery in step 11 below, we will keep Auto Reboot checked.
Step 10. Click the Start button on Odin now to start flashing the custom kernel on your Galaxy Note 5. You’ll get PASS message as show below upon successful installation from Odin.
If Odin gets stuck at setup connection, then you need to do this all again. Disconnect your device, close Odin, boot device into download mode again, open Odin, and then select the TWRP and flash it again as said above.If you get FAIL in the top left box, then also you need to flash the firmware again as stated just above.
Step 11. Wait till installation is finished, and when it’s done, it’s time to install the TWRP recoverynow. The procedure is same as above, and is mentioned .
Your Note 5 will stay in download mode.
Now,close Odin. Disconnect the device from PC.Open Odin again.
Connect the device to PC again.
Now, load the TWRP recovery file into AP slot of Odin, like you did for custom kernel.→
Make sure only Re-Partitionoption is unchecked under Options tab.
Keep Auto Reboot checked this time.
Hit Start button to install the TWRP recovery.After installation, device will restart.
Step 12. Once your Note 5 is powered on. We can proceed to install root. For that, make sure that you have SuperSU file in your device. Now, reboot into recovery mode.
Power off your Galaxy Note 5. Wait 6-7 seconds after screen goes off.Press and hold the three buttons Volume up + Home + Power together until you see T-Mobile logo on the screen.
Step 13. You’ll see TWRP recovery. To install root, tap on Install menu, and then select the SuperSU file (which you transferred in step 4 above). Then, do the swipe action at the bottom to confirm installation of root.
Step 14. When done, tap on Reboot System button to restart the device.
That’s it. When your Note 5 starts, it will be rooted on Android 6.0 Marshmallow update.
Itulah sedikit Artikel How to Root T-Mobile Galaxy Note 5 on Android 6.0 Marshmallow N920TUVU2DOK5 Firmware. terbaru dari kami
Semoga artikel How to Root T-Mobile Galaxy Note 5 on Android 6.0 Marshmallow N920TUVU2DOK5 Firmware. yang saya posting kali ini, bisa memberi informasi untuk anda semua yang menyukai Wahana Android. jangan lupa baca juga artikel-artikel lain dari kami.
Terima kasih Anda baru saja membaca Artikel Tentang How to Root T-Mobile Galaxy Note 5 on Android 6.0 Marshmallow N920TUVU2DOK5 Firmware.